Connect your cameras in four steps

You don’t need to replace your cameras or recorder. KadroVault connects to the video streams they already produce.

Check your equipment

Any IP camera or recorder (NVR) with an RTSP or ONVIF stream works. Analog cameras work through a hybrid recorder. Make sure the device has internet access.

NVR / PoE

Add the camera

In your account, choose “Add camera” and paste the RTSP address of the stream, for example rtsp://192.168.1.64:554/stream1. Choose how many days to keep recordings.

Add cameraRTSP URLrtsp://192.168.1.64:554/stream1Retention30 daysConnect

Check the upload

Within a minute the camera appears online with its bitrate. 1080p usually needs 1.5–2.5 Mbit/s of upload per camera.

Upload statusCAM 01 · 1080p · 2.1 Mbit/s · onlineCAM 02 · 1080p · 1.8 Mbit/s · onlineCAM 03 · 720p · 1.2 Mbit/s · onlineCAM 04 · 1080p · reconnecting…Archive: 30 days · 2 data centers

Set up notifications and access

Turn on motion alerts, invite colleagues with the right roles, install the mobile app. Done.

Motion · CAM 02Clip exported · MP4Access shared

FAQ

Will it slow down my internet?

Each 1080p camera uses about 2 Mbit/s of upload. You can lower quality or record only on motion.

What if the internet goes down?

Most recorders keep a local copy. When the connection is back, KadroVault continues recording.

Where is the video stored?

In two data centers in the Moscow region. Data never leaves the selected region.